CNC600 Injector Cleaner and Tester Machine

18 Dec 2018

As the manufacturer of CNC600 injector cleaner, we often end up fielding a lot of questions regarding our aftermarket products. These come in not only from trainee mechanics and DIY enthusiasts, but even longtime professionals in the industry.

What is CNC600 Injector cleaner?

CNC600 is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

1 Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
2 Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
3 Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
4 Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
5 Auto. test: To test injectors by simulating different working conditions.
6 On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.

What are the advantages of CNC600?

1. solenoid valve, automatic oil return (Value button)

2. Ultrasonic Cleaning can work together with CNC600 or alone

3. Support 1-20Ω nozzle

4. Test the injector resistance one by one and display its resistance (Resistance testing button)

5. working voltage: 12V

6. Quick connectors for pipeline should use the specific liquid connectors

What is difference between CNC600 and CNC602A injector cleaner and tester?

Function	CNC600	CNC602A
Appearance	Different	Different
PCB	Same	Different
Power	300w	150w
Test Resistance	Yes	No
Test Resistance and display	Yes	No
Oil-pressure adjustment	PMW	variable resistor
High resistance nozzle	Support	Support
Low resistance nozzle (1.2-2 Ω)	Support	No
ultrasonic cleaning and Nozzle drive together	Yes	No
Intelligent oil pump control system	Yes	No
oil pressure is ready before 5s by pump, then Nozzle is working	Yes	No
Standard configuration	Same	Same
Automatic	Yes	Yes
Automatic return oil by solenoid valve	Yes	Yes
Weight	21kg	46kg
radiator fan	Yes	No

If you have any further questions regarding CNC600 injector cleaner, please feel free to contact us.

Hot tags : injector cleaner cnc600 injector tester

prev : Do Fuel Injector Cleaners Really Work?
Next : Why The Injector Should Be Cleaned Regularly？

Injector Cleaner Machine

Injector Cleaner Machine

CNC600 Injector Cleaner and Tester Machine

CNC600 Injector Cleaner and Tester Machine

About us

Hot Tags

Contact us

follow us

register for newsletter